BFWTX - AUTOBODY FILLER

  • MSDS: BFWTX
  • Manufacturer: FIBRE GLASS EVERCOAT CO
  • Product Name: AUTOBODY FILLER
  • National Stock Number: 8010-00-926-2135
Product Identification

Product ID:AUTOBODY FILLER
MSDS Date:01/01/1985
FSC:8010
NIIN:00-926-2135
Kit Part:Y
MSDS Number: BFWTX

Responsible Party
FIBRE GLASS-EVERCOAT CO
6600 CORNELL ROAD
CINCINNATI, OH 45242-2033
US

Emergency Phone: 800-543-4530

Info Phone: 513-489-7600

Cage: 18731

Contractor
FIBRE GLASS-EVERCOAT CO INC
CINCINNATI, OH 45242 US

Telephone: 513-489-7600

Cage: 18731

Ingredients

BENZOYL PEROXIDE(45%)

CAS: 94-36-0

RTECS: DM8575000

Fraction By Weight: 2.0%

ACGIH TLV: 5 MG/CUM


STYRENE, MONOMER (SARA III)

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: 13.0%

OSHA PEL 100 PPM

ACGIH TLV: S,50PPM/100STEL;9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


TALC

RTECS: VV7720000

Fraction By Weight: 58.0%

ACGIH TLV: 20 MPPCF


POLYESTER RESIN

Fraction By Weight: 27%

Hazards

Effects of Overexposure:OBJECTIONABLE ODOR;EYE AND NASAL IRRITATION.
LOW-DIZZ.&DRUNKENESS.HIGH LEVEL-ANESTHESIA

First Aid

First Aid:EYE & SKIN-FLUSH RPOMPTLY W/PLENTY OF H*2O,GET MED ATT.INH
-PROMPTLY REMOVE TO FRESH AIR,GET MED ATT. INGESTION-NO KNOWN
ANTIDOTE*TREAT SYMPTOMATICALLY,GET MEDICAL ATTENTION.SKIN-REMOVE
CONTAMINATED C LOTHING WASH W/SOAP & WATER.

Fire Fighting

Flash Point:98 F CC
Extinguishing Media:WATER FOG,FOAM,CO*2,DRY CHEMICAL
Unusual Fire/Explosion Hazard:AT ELEVATED TEMP,SUCH AS FIRE
CONDITIONS,POLYMERIZTION MAY TAKE PLACE,CONTAINED POSS.VIOLENT
RUPTUR

Accidental Release

Spill Release Procedures:COVER SPILL W/ABSORBENT AGENT.SCRAPE UP, CLEAN
SPILL AREA W/SOLVENT

Handling

Handling and Storage Precautions:CONTROL TEMPERATURE IN STORAGE BELOW
80F. DO NOT USE NEAR FIRE OR FLAME.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED PROTECTION FOR EXPOSURE
OF CONCERN
Ventilation:MECHANICAL(GENERAL)-DOWN DRAFT MECH EXHST.NO LOCAL NEEDED
Protective Gloves:NEOPRENE,NONSOL
Eye Protection:CHEM WORKERS GOGGLES.
Supplemental Safety and Health
VAPOR IS 1.1 TIMES HEAVIER THAN AIR AT 100 F AND HAZ AN IGNITION
TEMPERATURES OF 914 F. CONFORMS TO SPEC TT-F-322D, AMEND 1.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:293 F
Vapor Pres:4.5
Vapor Density:3.6
Spec Gravity:1.74
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY PASTE,AROMATIC ODOR.
Percent Volatiles by Volume:12.0

Stability

Stability Indicator/Materials to Avoid:YES
ORGANIC PEROXIDES
Stability Condition to Avoid:DO NOT STORE AT TEMPERATURES ABOVE 80F
Hazardous Decomposition Products:CO & CO*2
Conditions to Avoid Polymerization:DO NOT STORE AT TEMPERATURES ABOVE
80F

Disposal

Waste Disposal Methods:INCINERATE IN PROPERLY DESIGNED FURNACE.COMPLY
W/FEDERAL,STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.